Vibrating Feeders
Vibrating Equipment TopClose
| Model | Max. feeding capacity (T/Hr) |
Trough size width x length (mm) |
Voltage (V) |
Freque ncy (Hz) |
Vibration per min. |
Input (W) |
Current (A) |
Voltage x current (VA) |
Rating | Weight (kg) |
Applicable controller |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sand | Coal | ||||||||||||
| F-152BDT | 10 | - | 200x610 | 200/400 | 50/60 | 3000/3600 | 60 | 1.5/0.7 | 300 | Continuous | 40 | C4-5B (200V) |
|
| F-212BDT | 35 | 18 | 310x762 | 200/400 | 50/60 | 3000/3600 | 100 | 2.5/1.25 | 500 | Continuous | 120 | ||
| F-22BDT | 50 | 26 | 356x914 | 200/400 | 50/60 | 3000/3600 | 200 | 5/2.5 | 1000 | Continuous | 200 | ||
| FH-22BDT | 65 | 34 | 458x914 | 200/400 | 50/60 | 3000/3600 | 280 | 7/3.5 | 1400 | Continuous | 230 | C6-15SC C5-15EHF |
|
| F-33BDT | 100 | 52 | 558x1067 | 200/400 | 50/60 | 3000/3600 | 400 | 10/5 | 2000 | Continuous | 460 | ||
| FH-33BDT | 130 | 68 | 610x1067 | 200/400 | 50/60 | 3000/3600 | 560 | 14/7 | 2800 | Continuous | 560 | ||
| F-44BDT | 220 | 115 | 762x1219 | 200/400 | 50/60 | 3000/3600 | 960 | 24/12 | 4800 | Continuous | 1000 | C6-30SC C5-30EHF |
|
| F-45BDT | 330 | 172 | 914x1524 | 200/400 | 50/60 | 3000/3600 | 1200 | 30/15 | 6000 | Continuous | 1500 | ||
| FH-45BDT | 440 | 230 | 1219x1524 | 200/400 | 50/60 | 3000/3600 | 1440 | 36/18 | 7200 | Continuous | 1800 | C6-50SC C5-50EHF |
|
| F-55BDT | 600 | 310 | 1372x1524 | 200/400 | 50/60 | 3000/3600 | 2000 | 50/25 | 10000 | Continuous | 3200 | ||
| F-66BDT | 800 | 420 | 1524x1829 | 200/400 | 50/60 | 3000/3600 | 2400 | 60/30 | 12000 | Continuous | 3900 | C6-80SC C5-80EHF |
|
| F-88BDT | 1250 | 650 | 1829x1829 | 200/400 | 50/60 | 3000/3600 | 3200 | 80/40 | 16000 | Continuous | 6500 | ||
Note:
- Feeding capacities apply to standard flat-bottom open type with hopper skirts when bulk densities of sand and coal are 1.6 and 0.8, respectively, trough angle is 10°(horizontal for models F00B~11B) and voltage is 60Hz.
- Standard paint color is Munsell 2.5G 7/2.
- Power supply and wire size should be selected based on VA.
- Weight for CF-1~CF-4 is referred for driving part. Weight for F-152BDT～F-88BDT is referred Flat bottom open type (SS400)
