High efficiency screen suitable for any particular material, application, purpose, etc. irrespective of grain size.
Model | Applications | Drive method |
---|---|---|
SF Type Electromagnetic Screen | Frequently used as screening combined with cutting out function. Also combined and used with weighing machines. Most suitable for removing lumps and wastes of resin pellets, and for fine powders in chemical, food and other industries. | Direct linear drive type using leaf-spring resonance with electromagnetically generateds vibration. |
RVS Type Rotary Vibrating Screen | Suitable for a wide variety of process in feed, food, chemical, ceramic and other industries. Mainly middle sized materials up to 1800x2000(mm). | Rotary vibrator is mounted directly on trough for direct transmission of vibrations to trough and screen. |
SMVCB Type Balanced Screen | Screen used at various types of industries, and having not only screening function but also conveying function. Suitable for screening and conveying molding sand, resin powder, pellet, sugar, abrasives, coal powder, alumina, and more. | Resonant type elastic drive using 3-phase induction motor and eccentric shaft. |
SBM Type Perfect Balanced Screen | Capable of tightly covered construction or long model easily; most suitable for fine powder in chemical, food and other industries. | Perfectly balanced type elastic drive using 3-phase induction motor and eccentric shaft. |
Rubber Spring Screen | Used for feeding and screening materials, from fine to massive materials such as coke, sintered ore, and iron ore. | Resonance type consisting of 3-phase induction motor, unbalanced weight, and rubber spring. |
KRS Type Wave Screen | Wave screen can handle various kinds of granular materials that used to be difficult to handle continuously in the past because of clog. This is especially suitable for humid materials such as piled. | Combination drive receiving mixture of both round vibration from 3-phased induction motor and unbalanced weight and elasticity of screen by rubber spring for resonant vibration. |
LDS Type Linear Drive Screen | Large screen used for screening coke, coal, sintered ore, iron ore, copper ore, limestone, crushed stone, etc. Applicable as both dry and wet types. | Forced drive using 3-phase induction motor and unbalanced weight to get linear motion. |
SFS Type Self-flow Screen | Used almost same purpose as linear drive screen, but this inclined type is lighter and cheaper, and used as middle size screen. | Forced drive that receiving round vibration from 3-phase induction motor and unbalanced weight. |
GYS Type Gyratory Screen | Suitable for fine powder to minute powder because screen cloth vibrates roundly without vertical vibration. Therefore, it is very rare to pass columnar materials. Thus, it’s suitable for special use such as removing pellet waste. | Horizontal swing using 3-phase induction motor, vertical eccentric shaft and roller. |
GF⋅RGH⋅RVG Type Grizzly Feeder | Used for rough screening of quarried stuffs, such as crushed stone, iron ore, coal, and briquette. | GF…Electromagnetic type RGH…Electric motor type RVG…Vibrating motor type |
Model | Stroke (mm) |
Vibrations per min. 50/60Hz |
Stroke adjustment |
Clogging prevention |
Recommended screen opening |
Explosion proof structure |
Installation method |
||
---|---|---|---|---|---|---|---|---|---|
SF Type Electromagnetic Screen | 0∼1.5 | 3000 /3600 |
*1 | - | 150 mesh ∼50mm |
* | Floor mounted⋅ Suspension Horizontal or Quasi -horizontal |
||
RVS Type Rotary Vibrating Screen | 4P | 2 ∼ 4 |
1450 /1710 |
*2 | Tapping ball is required | 150 mesh ∼30mm |
* | Floor mounted⋅ Suspension Horizontal or Inclined |
|
8P | 5 ∼ 8 |
720 /850 |
|||||||
SMVCB Type Balanced Screen | 8∼18 | 450 ∼650 |
*2 | Tapping ball is required | 150 mesh ∼50mm |
- | Floor mounted Horizontal or Quasi -horizontal |
||
SBM Type Perfect Balanced Screen | 8∼20 | 450 ∼650 |
*2 | Tapping ball is required | 150 mesh ∼50mm |
* | Floor mountedl Horizontal or Quasi -horizontal |
||
Rubber Spring Screen | 6∼7 | approx 1100 |
*1 | Tapping ball is required | 150 mesh ∼10mm |
- | Floor mounted・ Suspension Horizontal or Inclined |
||
KRS Type Wave Screen | Body Stroke 6mm Screen Stroke 16mm |
approx 900 |
*2 | Screen' s own tension and looseness |
2mm ∼40mm |
- | Floor mounted Inclined |
||
LDS Type Linear Drive Screen | 9∼13 | 6P | 980/- | - | 5mm ∼50mm |
* | Floor mounted Inclined |
||
8P | -/880 | - | |||||||
SFS Type Self-flow Screen | 5∼7.5 | 1000 ∼1500 |
*2 | - | 5mm ∼50mm |
* | Floor mounted Inclined |
||
GYS Type Gyratory Screen | 50∼70 | 200 ∼250 |
- | *1 Tapping ball is required | 150 mesh ∼1mm |
* | Floor mounted Inclined |
||
GF Type Grizzly Feeder | 0∼1.5 | 3000 /3600 |
*1 | *3 | Grizzly bar Opening from more than 15mm |
* | Floor mounted⋅ Suspension Quasi -horizontal or Inclined |
||
RGH Type Grizzly Feeder | 6∼7 | approx 1100 |
*1 | - | |||||
RVG Type Grizzly Feeder | 2∼8 | 720 ∼850 |
*2 | * |