Vibrating Feeders

Our vibrating feeders can carry any kinds of materials swiftly and precisely.

contact

> Vibrating Equipment Top

  • Features
  • Products
  • Specifications
  • Hopper Mount Method
  • Suspend Method

Delivery Record

Selection of F Type Feeders

F type Feeders feature a special feeding system in which the trough vibrates obliquely to feed materials.
The following equation gives the feeding capacity depending on the material to be handled when F type Feeder equipped with the uncovered flat bottom standard trough is used. Feeding capacity shows for standard sand (bulk density: 1.6, moisture content: 1%, Particle size: 20mesh), and can be obtained from Table 1

  • γ : Bulk density of material
  • C1 : Conversion factor for particle size (Fig. 1)
  • C2 : Conversion factor for moisture content (Fig. 2)
  • C3 : Conversion factor for trough inclination (Fig. 3)

Materials having excessive stickiness, nature of flashing, and a large bulk density are excepted from this equation.

Movement diagram of material Ratio between particle size of
material and feeding efficiency
Movement diagram of material Fig.1
Ratio between moisture content of
material and feeding efficiency
Ratio between trough inclination
and feeding efficiency
Fig.2 Fig.3
Max. feeding capacity of F type Feeder/Table 1
Model Max. feeding capacity (T/Hr) on 60Hr Trough size width x length (mm) Voltage (V) Frequency (Hz) Vibration per min.
F-152BDT 10 200x610 200/400 50/60 3000/3600
F-212BDT 35 310x762 200/400 50/60 3000/3600
F-22BDT 50 356x914 200/400 50/60 3000/3600
FH-22BDT 65 458x914 200/400 50/60 3000/3600
F-33BDT 100 558x1067 200/400 50/60 3000/3600
FH-33BDT 130 610x1067 200/400 50/60 3000/3600
F-44BDT 220 762x1219 200/400 50/60 3000/3600
F-45BDT 330 914x1524 200/400 50/60 3000/3600
FH-45BDT 440 1219x1524 200/400 50/60 3000/3600
F-55BDT 600 1372x1524 200/400 50/60 3000/3600
F-66BDT 800 1524x1829 200/400 50/60 3000/3600
F-88BDT 1250 1829x1829 200/400 50/60 3000/3600

Note: The max.feeding capacities apply to standard flat-bottm open type with skirts when bulk density of sand is 1.6, though angle is 10∞ (horizontal for modeles F00B~11B) and voltage is 80 Hz.

Feeding capacity for respective materials (on 60Hz T/Hr)
Model Depth
of
material
(mm)
Trough
inclination
downward
Materials
Quick
lime
Iron
ore
Lime
stone
Coke Sintered
ore
Chemical
fertilizer
Resin
pellet
Sugar Granular
foods
F-212BDT 100 17 30 22 9 25 16 8 15 7
10° 18 33 24 10 27 17 9 16 8
F-22BDT 120 25 42 32 13 35 22 12 20 10
10° 26 45 34 14 38 23 13 21 11
FH-22BDT 130 31 52 40 17 43 28 15 26 13
10° 33 56 43 18 47 30 16 28 14
F-33BDT 180 53 89 69 28 76 48 25 44 21
10° 56 96 73 30 81 51 27 47 23
FH-33BDT 200 65 108 84 35 93 59 31 54 27
10° 68 118 89 37 98 62 33 57 29
F-44BDT 250 103 173 133 56 147 95 50 86 44
10° 108 188 143 58 157 100 52 92 46
F-45BDT 320 146 244 188 79 208 136 71 122 62
10° 153 264 201 83 222 142 75 130 65
FH-45BDT 360 191 319 247 103 272 175 93 159 80
10° 200 346 263 108 289 185 97 170 84
Bulk density (T/m3) 1.0

1.2
2.1

2.2
1.4

1.6
0.5 1.6

2.0
0.9 0.45 0.8 0.4
Moisture content (%) 0 0

10
0

10
0

5
0

5
1

4
0 0.2 5

15
Particle size (mm) 2

30
5

50
2

30
15

75
5

50
1.5

4
2

5
0.3

1
0.5

3

Note: The feeding capacities apply to standard coverd type when voltage is 50 Hz, and adjusted to 1.2 times when voltage is 60Hz.