Parts Feeders : SINFONIA TECHNOLOGY CO., LTD.

DMS Series
Almost no damage to handling work pieces by smooth handling. A low height model is now on sale.

Compact size makes it possible to interchange them with EA/ER Series parts feeders or those of other manufacturers.
It's able to handle works smoothly and maintain its ability even sorting complex material.
Providing the most suitable vibrating degree and position gap depends on your works.

Drive Unit Specifications

Model		DMS -15C	DMS -20C	DMS -25C	DMS -30C	DMS -38C	DMS -45C
Drive unit outer diameter(mm)		φ160	φ210	φ260	φ310	φ390	φ460
Drive unit height(mm)		130	150	185	220	250	265
Drive unit weight(kg)		7	14	24	40	70	110
Rated voltage(V)		200
Rated current(A)	Horizontal	0.18	0.3	0.6	2.0	2.0	2.0
Rated current(A)	Vertical	0.18	0.3	0.3	0.8	0.8	2.0
Vibration frequency(HZ)		100〜180		70〜110
Unprocessed bowl diameter (mm) (cylindrical)		φ150	φ200	φ250	φ300	φ375	φ450
Max. bowl diameter (mm) (cylindrical)		φ250	φ320	φ400	φ500	φ600	φ700
Max. amplitude (mm) （Unprocessed cylindrical bowl periphery）	Horizontal	0.6		1.0
	Vertical	0.13		0.3
Max. loaded weight(kg) (workpieces + bowl weight)		2.3	4	8	12.5	17	26
Cross section area of power cable(mm²)		0.75×5cores
Applicable controller		C10-4DM

Dimensions

DMS-15C/20C

Dimensions Chart

Unit:mm

Model	H	φA	φB	M	φD	φE	φF	φd	φe
DMS-15C	127～130～133	160	150	M8	72	94	130	50	120
DMS-20C	147～150～153	210	200	M10	100	130	170	70	160

Dimensions

DMS-25C~45C

Dimensions Chart

Unit:mm

Model	H	φA	φB	M	φF	L	N	O	Q	φD	φE	φd	φe
DMS-25C	182～185～188	260	250	M12	216	58	50	16	10	140	160	100	200
DMS-30C	215～220～225	310	300	M12	252	85	75	20	20	172	192	140	240
DMS-38C	245～250～255	390	380	M16	324	85	75	20	20	215	240	170	300
DMS-45C	260～265～270	460	450	M16	390	85	75	20	20	270	300	210	350

Parts Feeders Top｜

Page Top