Parts Feeders : SINFONIA TECHNOLOGY CO., LTD.

C10-4DM

Simple and easy start up

• Simple and easy start up
Stroke sensor gain adjustment is not required. Just by selecting a drive unit model at the initial setting stage, necessary parameters are set automatically.

• Easy operation
‘Selection Dial’ and ‘Setting Encoder’ allow for easy operation for anyone.

• Save more space
This controller has the same dimensions as C10-5VF/5VFEF and the footprint is reduced by 36% from the previous model.

• Easy wiring
Between a driving unit and a controller are connected by connectors.

• Energy-saving auto-tuning
Auto tuning function reduces power consumption by tracking the resonance point and keeping vibration frequency on it continuously.

• Electronic control gives optimal vibration
Electronic control of horizontal/vertical amplitudes and phase difference provides ideal vibration characteristics for any type of workpiece.

Dimensions

Dimensions Chart

Model		C10-4DM
Input power		AC200-230V ±10% 50/60Hz
Control system		PWM system
Output	Voltage	0～190V
	Vibration frequency	28～45Hz, 65～120Hz, 90～180Hz
	Max. current	horizontal: 4A vertical: 2A
Oparating mode	Standard drive	Automatic tuning to horizontal resonance point. By amplitude phase control without frequency setting
Additional features	Constant phase difference control	Horizontal/vertical amplitude phase difference kept constant
	Speed selection	Choice of 4 pre-set speeds by external signal
	Start/Stop control	Stops and starts by external signal
	Output signal	Outputs signal tuned to unit operation
	Soft start	Start-up time 0.2~4.0 seconds
	On/Off delay timer	Delay time 0.2~60 seconds
	Sensor power source	3P power plug gives DC12V, max. 80mA
Synchronized power source	Function	Power source synchronized to parts feeder operation (RUN)
	Control system	On/Off control through a triac
	Output voltage	As power source input to controller
Other	Max. current	2A
	Noise resistant voltage	Above 1000V
	Ambient temperature range	0〜40℃
	Ambient humidity range	10～90% (No condensation)
	Applicable Space	Indoor (Place where no corrosive gas, and dust.)
	Color of case	Japan Paint Industry Association U75-70D
	Weight	2.0kg
Compatible equipment		DM-30C, 38C, 45C, 65C DMS-15C, 20C, 25C, 30C, 38C, 45C

Parts Feeders Top｜

Page Top