Industrial Electrical Equipment
& Power System
LMCH-HA-71 Series
Duty rating : E.D. 75%
■For normal temperature scrap handling (up to 100℃)
■High power model
| Type | LMCH- 130HA-71 |
LMCH- 150HA-71 |
LMCH- 170HA-71 |
LMCH- 180HA-71 |
LMCH- 210HA-71 |
LMCH- 240HA-71 |
LMCH- 320HA-71 |
Rated voltage |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dimensions | A | mm | 1300 | 1500 | 1700 | 1800 | 2100 | 2400 | 3200 | ||
| B (approx.) | 1300 | 1350 | 1670 | 1610 | 1960 | 1990 | 2300 | ||||
| C (approx.) | 220 | 220 | 310 | 350 | 350 | 380 | 380 | ||||
| D | 175 | 175 | 210 | 250 | 250 | 280 | 280 | ||||
| E | 50 | 50 | 60 | 80 | 80 | 90 | 90 | ||||
| Weight (approx.) | kg | 2400 | 3400 | 4600 | 5250 | 7400 | 10000 | 19500 | |||
| Current (when cold) | A | 58.6 | 74.5 | 92.3 | 101.8 | 113.6 | 136.4 | 236.4 | Rated voltage when DC220V | ||
| Power
consumption (when cold) |
kW | 12.9 | 16.4 | 20.3 | 22.4 | 25.0 | 30.0 | 52.0 | |||
| Lifting capacity (cold/hot) |
When E.D. 50% |
Pig iron | kg | 1670/1570 | 2170/2100 | 2800/2680 | 3200/3100 | 4000/3600 | 5200/5000 | 10000/9400 | Overshoot while lifting DC490V Over excitation while lifting and gripping DC370V While handling material 180V |
| No. 1 H.M.S. | 1030/920 | 1460/1360 | 1730/1620 | 1900/1820 | 2700 /2450 | 3500 /3250 | 6500 /5700 | ||||
| No. 2 H.M.S. | 430/360 | 600/530 | 760/680 | 880/800 | 1550/1150 | 1800/1650 | 3500/3100 | ||||
| When E.D. 75% |
Pig iron | 1670/1520 | 2170/2030 | 2800/2600 | 3200/3020 | 4000/3500 | 5200/4800 | 10000/9000 | |||
| No. 1 H.M.S. | 1030/870 | 1460/1310 | 1730/1580 | 1900/1770 | 2700/2350 | 3500/3100 | 6500/5500 | ||||
| No. 2 H.M.S. | 430/340 | 600/500 | 760/650 | 880/760 | 1550/1050 | 1800/1500 | 3500/3000 | ||||
| Components | Cable connector | PJW-102 | PJW-202 | HI140-03300 | |||||||
| Cable drum | U5-C1502G1 | U5-E1502G2 | D-80GB | ||||||||
| Attached cabtire cable | 14mm2, 2hearts 20m | 22mm2, 2hearts 20m |
30mm2, 2hearts 20m |
60mm2, 2hearts 25m |
AC200/220V When receiving power |
||||||
| Power panel | LMP-254A-D | LMP-324A-D | LMP-454A-D | LMP-634A-D | |||||||
| Power receiving box | NFI-2SW | NFI-4SW | NFI-4SW | NFI-6SW | |||||||
| Inverter | 51kVA | 65kVA | 92kVA | 140kVA | |||||||
| Instrument casing | MPBS-2111-20G | MPBS-2111-25G | MPBS- 2111-35G |
MPBS- 2111-50G |
|||||||
| When using controller | MCS-2 | ||||||||||
| When using two-points push button |
KGN2112NY | ||||||||||
| When using eight-points push button |
COB-74 | ||||||||||
No.1 H.M.S: Grinding dust of thick blooms (Thickness:over 6mm, width:less than 600mm, length:less than 1500mm)
No.2 H.M.S: Dust（thickness:over 3mm, wideth: less than 450mm, length: less than 900mm）include steel plate, shaped steel and car scrap.
Note)
- Ability might differ when you use LMP-192-D in area of 50Hz, hanging voltage will be DC270V.
- Hanging capacity increase 10% when starting up over shoot DC350V or 490V, and hanging over excitation DC290V (DC200V while lifting).
- Measurement C of LMCK-175～245HA-6 is included measurement of protector.
- Type of cab tire cable is 2PNCT (5.5mm2), and PNCT for lifting magnet (14～38mm2).
- Hanging capacity might change depend on shape, dimensions, and state of compile of handling scrap. Therefore, hanging capacity is not reference.
