This compact sized device controls load torque of powder clutches and brakes by constant voltage, or current.
By applying multifunctional method by microcomputer control, torque control became more stable. Moreover, variable frequency control from precise to rough is possible with 4 ways of switching. Controller is protected when load short by equipping over load protection circuit. |
 |
| Features |
| 1 |
Constant voltage/ constant current
Not only between 0~24V of constant voltage, but also between 0~2.8A of constant current is possible. |
| 2 |
Multifunctional method by microcomputer
Inertia compensation output, and stop timer activated by outer signal is possible. |
| 3 |
Precise/ rough control of variable output One-touch method
with multi turn variable resistor on panel surface, one-touch precise/ rough control becomes possible. |
| 4 |
4 way switching of output Correspond 2 external signals
3 patterns by program, and manual 4 way switching is possible. |
| 5 |
With load short protection circuit function
The controller is protected by protection circuit when load short. |
| Specifications |
| Type |
PS-2.8A |
| Input voltage |
AC85～265V
(Free power source method) |
|
Output display |
00.0 (When constant voltage), 0.00(When constant current) |
| Output voltage |
DC0 ～ 24V |
Error display |
0V(Excess voltage), 0C(Excess current) |
| Output current |
0～2.8A |
Structure |
Steel sheet made wall mounted protection type |
| Output fluctuation |
Below0.05V, Above0.005A |
Paint color |
Case：Munsell5PB7/2
Panel：Black |
| External input |
Adjustable resistor1kΩ(0.5W)
DC0～10V |
Weight |
Approx.1.3kg |
| External signal |
RUN/RC1, STOP/RC2signal
(Pulse, continuous signal possible) |
Applicable types |
POC/POB-0.3～20
PHC/PHB-0.6～20
PMC-10～40, PRB-1.2～20
PTB-2.5～20
HO/HB-0.6～10
TB-260～1525 |
|
|
| Input/Output connection diagram |
|
|
